6.2.6 Setting the AUTO Power OFF (APO) Timer
After a measurement is taken and the trigger is released, the meter freezes the reading on the
display for a period of time before automatically switching off. This APO time can be set to 5,
10, or 20 seconds.
1. Press and hold Menu and use the arrow buttons to scroll to APO
2. Use the Menu button to select 5, 10, or 20 seconds.
3. When selection is complete, use the arrow buttons to scroll to another menu item or
press
6.2.7 Viewing the Help Screen
From the Help screen in the Programming menu the user can view FLIR contact information and
other useful data.
1. Press and hold Menu and use the arrow buttons to scroll to the Help icon
2. Press Menu to open the item.
3. View the information.
4. Press
6.2.8 Viewing the Info Screen
From the Information screen in the Programming menu the user can view the meter's firmware
version and calibration date.
1. Press and hold Menu and use the arrow buttons to scroll to the Information
2. Press Menu to open the item.
3. View the firmware revision
4. Press
FLIR TG54_TG56 User Manual
to return to the normal operating mode.
to return.
to return.
, calibration date
20
Document Identifier: TG54_TG56‐en‐US_AA
.
, and Laser information
.
icon.
.