Control Buttons And Trigger Descriptions - FLIR TG54 User Manual

4.6 Control Buttons and Trigger Descriptions
The TG Series has four (4) control buttons located directly below the display, in addition to the
trigger.
Hint: Use the thumb for button control and the index finger for trigger control.
BACK / Work Light Button
Long‐press to activate/deactivate Work light; Short‐press to exit a Programming menu screen
OK/MENU BUTTON
Long‐press to access the Programming menu; short‐press to confirm/open a menu parameter,
and toggle/select a menu option
UP/DOWN ARROW NAVIGATION BUTTONS
Scroll the selections in the Programming menu
Steps through the three display modes (shortcut that permits display mode changes without
having to access the Programming menu); see Section 5.5, Display Mode Options, for more
information
TRIGGER
Pull and hold the trigger for one second to power ON and take measurements
Release the trigger to freeze the displayed reading (the meter switches off automatically after
5, 10, or 20 seconds; the time can be set in the Programming menu, see Section 6)
FLIR TG54_TG56 User Manual
10
Document Identifier: TG54_TG56‐en‐US_AA