Programming High And Low Alarms; Setting The Laser Pointer On Or Off; Setting The Temperature Units O C/ O F - FLIR TG54 User Manual

6.2.3 Programming High and Low Alarms
Set the alarms off (grey circular icon), set only a High (red) or Low (blue) alarm, or set both a
High and a Low (red and blue) alarm.
1. Press and hold Menu to access the Programming menu and scroll to the Alarm icon
2. Press Menu to open the item and use Menu again to select OFF
or High/Low
3. If OFF is selected, press
4. For all other selections, scroll down to the alarm threshold field and set the High, Low, or
High and Low (combination) alarm setpoints. For example, if Low alarm is selected:
a) Use the arrow button to scroll down to the alarm threshold digits and press Menu.
b) Use the arrow buttons to select the desired Low alarm threshold.
c) Press Menu to confirm and press
5. Follow the steps above to program the other alarm modes. Note that the High alarm
threshold cannot be set lower than the Low alarm threshold and vice versa.
6. Refer to Section 5, Operation, for more information on Alarm operation.
6.2.4 Setting the Laser Pointer ON or OFF
1. Press and hold Menu and use the arrow buttons to scroll to the Laser Pointer
2. Use the Menu button to toggle the laser pointer ON/OFF.
3. When selection is complete, use the arrow buttons to scroll to another menu item or
press
6.2.5 Setting the Temperature Units
1. Press and hold Menu and use the arrow buttons to scroll to the units icon
2. Use the Menu button to toggle the Temperature units.
3. When selection is complete, use the arrow buttons to scroll to another menu item or
press
FLIR TG54_TG56 User Manual
.
to return to the normal operating mode.
to return to the normal operating mode.
to return to the Programming menu.
to return to the Programming menu
o o
C/ F
19
Document Identifier: TG54_TG56‐en‐US_AA
, High , Low
icon.
.
.
,