Ip Setup Tab - Matrox Monarch LCS User Manual

55
Perform a factory reset by pressing and holding the Reset button on the
3
device for at least five seconds (see
The Monarch LCS boots up with your settings loaded.
For more information on Monarch configuration files, including generating or
editing configuration files, consult the Matrox Monarch LCS Dev Tools Reference
Guide, which is provided in PDF format in the Matrox Monarch LCS Support
section of our website at www.matrox.com/video/support.

IP Setup tab

The IP Setup tab in the Command Center lets you switch the Monarch LCS IP
mode between DHCP and Static. By default, Monarch LCS is set to DHCP
mode.
¡ Important Changing the IP mode will end the current Command Center
session. To access the Monarch LCS Command Center again via IP address, you
will need to enter a different Monarch LCS IP address in your browser's address
field. If switching to Static mode, you may also be required to change your
computer's network configuration. For information on obtaining the Monarch
LCS IP address and accessing the Command Center in DHCP or Static mode, see
Chapter 3, "Network Connection and
To access the IP Setup tab, open the Monarch LCS Command Center, and then
choose Device > IP Setup .
Device page
"Reset to factory defaults"
Setup.
on page 13).