6
Matrox Monarch LCS hardware
This section explains the Matrox Monarch LCS hardware components. For
hardware technical specifications, see
Specifications."
Input select
Power LED
Power
Input select button
With the Input select button, you can select from either an HDMI or SDI input
source, and an LED illuminates indicating which source is in use. You can also
select the input source in the Command Center.
¡ Important While streaming or recording, any attempt to switch between
inputs by pressing the Input select button will not have any effect, whether or
not the front panel buttons have been disabled. This is the case only for the Input
select
disables all three buttons.
Chapter 2, Matrox Monarch LCS Hardware and Connections
Switch
Encode
HDMI in B
LAN
RS-232
button; however, clicking the Lock button in the Command Center
Appendix D, "Matrox Monarch LCS
USB port 1
USB port 2
See
"Status LEDs"
on page 14.
HDMI in A
SDI out
HDMI out
SD card slot
Reset button
Warning
LED
SDI in A
input
output
(Analog audio)