Matrox Monarch LCS User Manual page 45

33
Under Video , configure the following:
1
Select your video input sources. For Input A you can select either HDMI
a
or SDI .
For SDI Output , specify whether your output is coming from Input A or
b
Input B.
For HDMI Output , specify whether your output is coming from Input A
c
or Input B, or if you want a Channel preview . If you select Channel
preview
streaming/recording output, allowing you to view what the remote viewer
will receive.
Under Audio , select your audio input source (analog, digital input A or
2
digital input B) and configure the Sample Rate and Bit Rate .
Click Apply .
3
The Operating Mode is configured. In the Command Center's side menu, the
Operating Mode indicator shows the status, but is also a button to dynamically
switch between video inputs.
For more information, see the following sections:
• "Using the Command Center side menu"
• "About the Operating Modes"
• "Configuring video and audio settings"
Settings page
, the HDMI output will display the video at the resolution of the
on page 29.
on page 24.
on page 29.