Automatic Configuration Tab - Matrox Monarch LCS User Manual

52
and the Matrox Monarch LCS Utils (see
page 16). This is especially useful when you have multiple Monarch LCS devices
on the same network. To change the name of your Monarch LCS, type the desired
name in the Device name box, and then click Change .
By default, the Monarch LCS username and password are set to admin. The
device username cannot be changed, however, we do suggest that you change the
device password. To change the Monarch LCS password, enter the current and
new passwords, and then click Change . For information on resetting the
password to factory default, see

Automatic Configuration tab

The Automatic Configuration tab in the Command Center is where you can
export the current Monarch LCS settings to an XML file (called the Monarch
LCS configuration file), import settings from a previously-created configuration
file, or import settings from the same XML file hosted on a web page.
When you have a Monarch LCS configuration file, you can copy it to a USB
device, connect the device to USB port 2, and then perform a factory reset to
automatically load the settings. For more information on performing a factory
reset, see
The option to boot up Monarch LCS with all settings loading automatically from
a USB device, or loading settings from a web page at device reboot, allows you to
deploy other Monarch devices without logging in to the Command Center.
Chapter 4, Using the Command Center
"Network connection and IP address"
"Monarch LCS Utils application"
"Reset to factory defaults"
on page 18.
on
on page 13.