Table of Contents
Advertisement
50
• If you leave the Save/Load page before clicking Apply , all changes are lost.
• Do not connect or disconnect any cables to the Monarch LCS while settings
are being applied.
Profiles
Monarch LCS lets you save up to eight profiles that you can load at any time.
Profiles are made up of the encoding parameters and production settings,
including operating mode and destination (see
Whether you use preset or custom parameters, you can enter them once and save
them as a unique profile.
° To save a profile:
Go to the Encoder and/or Production tab, enter your desired settings (for
1
both channels), and then click Apply .
Go to the Save/Load tab and click Save . A window opens to save the
2
settings as a new profile (select an empty profile) or to save over a previously
saved profile (overwrite).
You can also rename a profile from the Profiles list using this method.
° To load a profile
Go to the Save and Load tab of the Settings page and select a profile from
1
the Profiles list and click View .
Click Load when the Replacement Settings window listing the profile
2
settings opens to accept.
Chapter 4, Using the Command Center
"Status page"
on page 26).
Hide quick links:
Advertisement
Table of Contents
