Advertisement
Thanks for purchasing a Solo Slider Dolly from VariZoom. This lightweight track dolly is very
easy to set up and use, but because it is rolling camera support, you must exercise caution
when operating the Solo Slider Dolly. Without proper setup and operation, damage to the
equipment and/or injury to the user and people around the equipment may occur.
1) Never set up the dolly track on ground that is not flat and level.
2) Always make sure the tripod feet are securely mounted within the dolly foot locks.
3) Do not walk on the track, keep the track clear of obstructions, and take care not to
run the dolly off the end of the track
4) If a jib is mounted to the Solo Slider Dolly, take extra precautions to ensure that the
system does not strike any people or objects in the vicinity.
If you have any questions or concerns about using and operating your Solo Slider Dolly,
please contact
info@varizoom.com
Included items:
10 pcs Track
10 pcs Underpad
2 pcs crossmembers
Folding Dolly
3 pcs claw-foot adapters
Extra set of rubber wheel
liners
Shoulder strap
Hex key
Case
Watch the Video Here:
http://www.youtube.com/watch?v=M6dRv1vBr7g#t=52
or call 512-219-7722.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for VARIZOOM Solo Slider Dolly
Summary of Contents for VARIZOOM Solo Slider Dolly
- Page 1 3) Do not walk on the track, keep the track clear of obstructions, and take care not to run the dolly off the end of the track 4) If a jib is mounted to the Solo Slider Dolly, take extra precautions to ensure that the system does not strike any people or objects in the vicinity.
- Page 2 Step 1 – Setting up the Track 1) Start by connecting the first 2 track pieces with one of the crossmembers. 2) Now add the underpads below the 2 track pieces. Continue adding track pieces and underpads until you have the desired length. 3) Connect the final 2 track pieces with the second crossmember.
- Page 3 Step 3 – Attaching the Tripod to the Dolly The Solo Dolly can accept a wide range of tripods. The foot locks can slide along the entire length of the dolly legs to accommodate different footprints from various tripods. The jaws of the foot locks open wide enough to fit most tripod feet. We also include rubber foot adapters for claw-foot tripods.
- Page 4 Depending on your setup, you may want to add a bit of weight to add stability (as long as you don’t exceed the 45lbs recommended payload). For example, if you’re using the Solo Slider Dolly with a lightweight tripod and camera, you may find that it’s beneficial to add a ‘rock bag’ like the...
- Page 5 -TIP: If any of the track pieces seem to fit a bit loosely and make noise when rolling over the joints, apply a thick wax or something like Chapstick on the end fittings to silence the joint. www.varizoom.com Accessories: VZTRB – rock bag for weighting tripods SOLO JIB-AL –...
Need help?
Do you have a question about the Solo Slider Dolly and is the answer not in the manual?
Questions and answers