Product Information & Specifications - Intex CS8110 Owner's Manual

HOW THE CHLORINE IS GENERATED
This product is specially designed for above ground pools. It will destroy the
bacteria, oxidize bather organics and control algae, which provide a safe, clean and
comfortable swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chloride.
During the installation of your Saltwater System, a measured quantity of salt is
dissolved in the pool water to make it slightly salty. The pool water flows through
the Saltwater System 's electrolytic cell to produce chlorine. The chlorine dissolves
in the water and instantly starts destroying bacteria and algae. It also oxidizes all
other organic materials.
HOW COPPER IONS ARE GENERATED
Low voltage direct current is applied to the copper electrode, and copper ions are
generated and dissolved instantly in the water. Copper is an effective algaecide,
which will prevent algae from growing in the pool.
Power:
Amperage:
Wattage:
Ideal Salt Level:
Maximum Chlorine Output/hour:
Copper Ionizer Output Current:
Minimum Flow Rate:
Limited Warranty:
Copper electrodes
Hose Returning
Water to Pool
Power Switch
SAVE THESE INSTRUCTIONS
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5" X 10.3" PANTONE 295U
PRODUCT SPECIFICATIONS
110 - 120 Volt AC
1.1A
125W
3000 ppm (parts per million)
12 grams/hour
175 mA
700 ~ 4000 gallons/hour (2650 - 15140 liters/hour)
2 Years (see "Limited Warranty")
Electrolytic Cell
Electronic
Control Station
English
131
Flow Sensor
Hose from
Filter Pump
Power Supply
Page 7
07/28/2010