Intex CS8110 Owner's Manual page 10

SETUP INSTRUCTIONS (continued)
Connecting the system to pump and pool with 1-1/2" (38mm)
connections/hoses:
Pump and pool with 1-1/2" (38mm) connections do not require the adaptors
A (1) or B (9). Install as follows:
Drawing #2
WATER TO
POOL
ID 1-1/2" (38mm)
HOSE
1. Go directly to step 2 if your pool is empty. If your above-ground-pool is filled
with water, close the plunger valves before installing the Saltwater System.
2. Disconnect the water return hose from the filter pump connection and connect
it to the Saltwater System outlet.
3. Connect the connector hose (8) to the filter pump outlet connection.
4. Open the plunger valves to allow the water to flow.
SAVE THESE INSTRUCTIONS
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5" X 10.3" PANTONE 295U
SWIMMING POOL
BOOST
8
SALTWATER
SYSTEM
English
PLUNGER
WATER FROM
FILTER
PUMP
ID 1-1/2" (38mm)
HOSE
07/28/2010
131
VALVE
POOL
Page 10