Connecting The Cables - AURES ODP 333 User Manual

2-2. Connecting the Cables

In order to use the printer, you are required to connect cables to the printer. All cables connect
to the connector panel on the rear side of the printer, which is shown below:
INTERFACE CONNECTOR(SERIAL)
For connection to a
INTERFACE CONNECTOR(USB)
host computer.
For connection to a
host computer.
Before connecting any of the cables, make sure that both the printer and the computer are
turned off.
PERIPHERAL DRIVE CONNECTOR
Connects to peripheral units such as
cash drawers, etc. Do not connect this
to a telephone.
6
POWER CONNECTOR
For connection of the
AC adapter.
Never unplug the AC
adapter while the printer is on.
INTERFACE CONNECTOR(ETHERNET)
For connection to a host computer.