NOTE To install the optional seismic mounting brackets, the length of the rails must be
between 28.5 and 32 inches.
15. If installing the optional seismic mounting brackets, align the two
EBM seismic mounting brackets with the screw holes on the sides
of the EBM above the rear mounting brackets. Loosely secure the
brackets with four supplied wing bolts. See Figure 8.
Do not tighten the wing bolts.
Figure 8. Installing the Optional EBM Seismic Mounting Brackets
Eaton 9140 EBM User's Guide
S
164201623 Rev C www.eaton.com/powerquality
INSTALLATION
23