Eaton 9140 User Manual page 26

INSTALLATION
22
Eaton 9140 EBM User's Guide
12. Install two cage or clip nuts as shown in Figure 7. If the rack holes
are square, use two cage nuts. If the rack holes are round, use two
clip nuts.
13. Slide the EBM into the rack. Verify that the rear mounting brackets
engage in and slide easily along the inside of the rails.
14. Secure the front of the cabinet to the rack as shown in Figure 7.
Figure 7. Securing the Front of the EBM
S 164201623 Rev C www.eaton.com/powerquality
Position 8 (M6 screw
and clip/cage nut)
Position 3 (M5 screw)
Position 2 (M5 screw)