Eaton 9140 User Manual page 23

3. Using two M5 machine screws and an adapter plate, attach the rail
to the front of the rack (see Figure 1 and Figure 2).
Do not tighten the screws.
Figure 2. Securing the Front Rail
4. Adjust the rail size on the rail assembly for the depth of your rack
(see Figure 3).
Rear
Figure 3. Adjusting the Rail Depth (Right Rail Assembly Shown)
Eaton 9140 EBM User's Guide
Front M5 Screws
Adapter Plate
S 164201623 Rev C www.eaton.com/powerquality
INSTALLATION
Position 6
Position 5
Position 4
Position 1
Front
19