Preparing For Installation - Cisco UCS C480 M5 Installation And Service Manual

Installing the Server
•
•
•
•
•
•

Preparing for Installation

This section contains the following topics:
Installation Warnings and Guidelines
Note
Before you install, operate, or service a server, review the
Cisco UCS C-Series Servers
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents. Use the statement number provided at the end of each
warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
Warning
To prevent the system from overheating, do not operate it in an area that exceeds the maximum
recommended ambient temperature of: 35° C (95° F).
Statement 1047
Preparing for Installation, on page 13
Installing the Server in a Rack, on page 16
Initial Server Setup, on page 20
NIC Mode and NIC Redundancy Settings, on page 25
Updating the BIOS and Cisco IMC Firmware, on page 26
Accessing the System BIOS, on page 27
for important safety information.
C H A P T E R
Regulatory Compliance and Safety Information for
Cisco UCS C480 M5 Server Installation and Service Guide
2
13