Preparing For Component Installation - Cisco APIC M3 Installation And Service Manual

Preparing For Component Installation

Figure 11: Internal Diagnostic LED Locations
1 Fan module fault LEDs (one behind each fan
connector on the motherboard)
• Amber—Fan has a fault or is not fully seated.
• Green—Fan is OK.
2 CPU fault LEDs (one behind each CPU socket on
the motherboard).
These LEDs operate only when the server is in
standby power mode.
• Amber—CPU has a fault.
• Off—CPU is OK.
Preparing For Component Installation
This section includes information and tasks that help prepare the server for component installation.
Cisco APIC M3/L3 Server Installation and Service Guide
28
3 DIMM fault LEDs (one behind each DIMM socket
on the motherboard)
These LEDs operate only when the server is in
standby power mode.
• Amber—DIMM has a fault.
• Off—DIMM is OK.
-
Maintaining the Server