5.3.2
Bx 1A
C12
5.3.3
Bx 1A
/
◀
▶
1090.0
MHz
Setting the output channel
t > 2 s
OUTPUT:
▶
• By pressing
—> The channel range that can be set depends on the
type of Cassette used.
Frequency offset (fine tuning)
Important: Only change the frequency offset in exceptional
circumstances and if there is a well-founded reason for
doing so, since once you have changed it, all connected
televisions of the cable system must be adjusted to match it
by means of corresponding fine-tuning corrections.
• Press and hold down the
on the display.
• Set the frequency offset (+63 ... –64) with the
tons.
• Press the
—> The "INTPUT" menu is activated.
Setting the input frequency (transponder frequency)
In this menu with VPS code, the name of the station is dis-
played instead of "INPUT". The VPS code is not supported
by all stations!
INPUT:
I
• Press
to set the input frequency.
—> Change the position of the cursor with
- 13 -
- 13 -
Bx 1A
OUTPUT
C12
Fine
, set the desired output channel.
button until "0" also appears
▶
button.
+ 63...– 64
0
but-
/
.
◀
▶