Safety Regulations - Triax CCS 1231 Assembly Manual

1

Safety regulations

Important
• Assembly, installation and servicing must be carried out by an authorised
electrician.
• Switch off the operating voltage before starting assembly or service work or
pull out the mains plug.
• Install the system ...
- in a dust-free, dry environment,
- so that it is protected from moisture, vapours, splashing water and dampness,
- somewhere protected from direct sunlight,
- away from the immediate vicinity of heat sources,
- at an ambient temperature of < 50 °C.
• Make sure the device is adequately ventilated.
Do not cover the ventilation slots!
• Avoid short circuits!
• No liability is accepted for damage caused by a faulty connection or inexpert
handling.
• Observe the relevant standards, regulations and guidelines on the installation
and operation of antenna systems.
• Earth the SAT receiver using the equipotential bonding rail in accordance with
DIN EN 50083 and VDE 0855.
• Do not perform installation and service work during thunderstorms.
Take measures to prevent static discharge when working on the device!
Electronic devices should never be disposed of in the household rubbish.
In accordance with directive 2002/96/EC of the European Parliament
and the European Council from January 27, 2003 which addresses old
electronic and electrical devices, such devices must be disposed of at a
designated collection facility. At the end of its service life, please take
your device to one of these public collection facilities for proper disposal.
- 3 - - 3 -