4.2 Control panel
You can individually select the menus and menu items step-by-step using the
keypad of the head end:
–
/
–
◀
▶
–
–
M
–
– The parameters to be set are underlined (cursor).
5
Programming
The following examples show how to program the Cassette CCS 1233.
5.1 Preparation
• Connect the test receiver to the HF output of the head end.
• Set the output channel of the Cassette (see page 13) and adjust the test re-
ceiver to this channel.
• Switch on the modulator if necessary.
• Balance the output levels of the channel strips "A" and "B" if the difference in
level is ≥ 1 dB (see page 12).
• Measure the output level of the analogue cassettes and, if necessary, tune
them to a uniform output level.
scrolls forward through the menu
select parameters in the menus
set values, initiate actions
selects sub-menus
saves all entries
- 9 -
- 9 -