Indicator Panel; Back Panel - RCA VR525 User Manual

appendix: reference

Indicator Panel

POWER indicator Lights when the VCR is turned on.
RECORD indicator Lights when the VCR is recording.
TIMER indicator Lights during express recording and when
VCR is turned off and set for timer recording. Flashes when
timer recording is set and there is no cassette in the VCR. Also
flashes when clock has not been set.
VCR Indicator (Applies only if the VCR Viewing Channel is 3 or
4). Press the TV•VCR button to turn on or off.
• VCR indicator on: Picture from VCR.
• VCR indicator off: Picture from TV channel.

Back Panel

3 CH. 4 Switch Selects the channel to which you will tune the
TV to see the VCR picture if you connect the VCR using one of
the basic hookups.
AUDIO and VIDEO IN Jacks Receives signals from another
component, like a VCR or camcorder, when it is connected to
these jacks. Use INPUT on the remote to select "L" to record from
these jacks.
AUDIO and VIDEO OUT Jacks Sends signals from VCR to
another component, like a TV or VCR, when it is connected to
these jacks.
ANT. IN Jack Receives a signal from an antenna or cable system
when attached.
RF OUT Jack Passes signal to TV using the cable supplied.
ANT. IN
VIDEO AUDIO
IN
RF OUT
3 CH. 4
OUT
43