Front Panel Brightness (Vcr Display); Preferred Tape Speed - RCA VR354 User Manual

Hide thumbs Also See for VR354:
Table of Contents

Advertisement

Setting Up the VCR

Front Panel Brightness (VCR Display)

You can change the brightness level of the fluorescent display
panel on the front of the VCR. Press 4 on the remote control
repeatedly to switch between the options.
AUTO brightens the display when the VCR is on and dims the
display when the VCR is off.
BRIGHT keeps the display bright.
DIM keeps the display at a low brightness level.

Preferred Tape Speed

You can set the preferred tape speed. Press 5 repeatedly to
switch between the options.
SP sets the preferred recording speed to SP.
SLP sets the preferred recording speed to SLP.
Set Auto Repeat
A tape can be set to play the same segment over and over in a
repeating loop with the Set Auto Repeat feature. Set Auto
Repeat uses the VCR's memory counter to determine the
duration of the loop.
The Set Auto Repeat dialog box will ask for a loop end time to
be specified:
AUTO REPEAT
Set the length of time
you want the tape to
play in a repeating loop
Loop from 0:00 to -:--
(h:mm)
Press CLEAR to turn off
Press MENU to exit
The CLEAR key will erase all three numbers entered and
move the cursor back to the first position (hours).
The "Press CLEAR to turn off" message will appear only after
the first number has been entered into the end time.
Auto Repeat is set back to -:-- by resetting the dialog box, by
cassette ejecting or insertion, by powering off the VCR, by
power interruption, or by recording start.
Continued on Next Page
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat
0 Exit
The PREFERENCES menu allows access to settings
for your front panel brightness feature and
preferred tape speed.
Tape Speeds
SP (Standard Play)
Gives the best quality recording, but
fewer programs can be recorded on
the tape. Special effects such as
pause, slow motion, picture search,
and frame advance work well when
you play back tapes recorded in
this speed.
SLP (Super Long Play)
Gives three times the recording time
of tapes recorded in SP. Special effects
such as pause, slow motion, picture
search, and frame advance work well
when you play back tapes recorded in
this speed.
Recording Time:
Cassette
SP
T-120
2Hr
T-160
2Hr
OFF
OFF
2:00
AUTO
SLP
SLP
6Hr
8Hr
19

Advertisement

Table of Contents
loading

Table of Contents