Samsung AM***XMDCH Series Installation Manual page 11

Base ground work
150mm (6 inch) or more
Drain hole
< When installing on the ground >
The outdoor unit should be supported within the range of measurement below for base ground work.
Anchor bolt position
620 (24.40)
940 (37.00)
When the outdoor unit needs to be supported, fix it with wire as shown in the
picture.
- Slightly unwind the four screws on the cover top of the outdoor unit.
- Wind wires round the four screws and fasten the screws again.
- Fix the wires to the ground.
If the outdoor unit is not fixed securely, product may fall and it might cause loss of life or property damage.
Do not install the outdoor unit on a wood palette.
CAUTION
Fix the outdoor unit securely to the base ground with anchor bolts.
The manufacturer is not responsible for the damage occurred by not adhering to the standard of the installation.
To protect the outdoor unit from external condition such as rain, install it on the base ground and connect the
drain pipe to the drainage.
Install the outdoor unit
horizontally on the ground
< When installing on the roof >
Unit: mm (inch)
150mm (6 inch) or more
11