Test Instructions Summary - Auto Test AutoStop Mini Plus User Manual

The pass/fail outcome of the test will be determined based on the type of the vehicle
selected and the measured value of the average deceleration (SRV36). If the measured
average deceleration (SRV36) is below the limit value, the test outcome will be 'Fail'
(INSUFFISANTE). Otherwise, the test outcome will be 'Pass' (OK) when the measured
SRV36 value is above or equal to the limit value.

3.5 Test Instructions Summary

Screen Display
Blank Screen
Initial splash screen
Test?
Examiner?
Customer:
Reg No:
Test with GPS?
Press any key to
commence the test
Ready to go...
Prelude...
Sampling...
Calculating...
Avg Decel (SRV36), Max
Decel, duration, pass/fail
Save?
Print?
Print Another?
Repeat Test?
Must:
– Fix Mini Plus securely
– Install in a stationary vehicle
– Must drive in a straight line
AutoStop Mini Plus User Manual v2.014
1. Average Deceleration (SRV36)
2. Maximum Deceleration
3. Test Duration
4. Pass/Fail Outcome
Instruction
Switch On
Start to run test
Enter Examiner ID if it is not
stored previously
Enter customer name
Enter the Registration no
Conduct test with GPS
Press any key to commence
the test
Accelerate the vehicle
Forward direction detected.
Keep accelerating to
desired speed, then brake
Wait for result
Wait for result
Displays the test results of
brake test
To save test result
To print test result on
remote Bluetooth printer
To print duplicate test result
To repeat same test
Keys to Press
ON/OFF
Press any key to skip
ENTER
key and key-in ID
Press
and press ENTER
Key-in customer name and
press ENTER
Key-in registration no and
press ENTER
Press ENTER for YES and
any other key for NO
Press any key to commence
the test
Press ENTER
Press ENTER to save or
to go to next item
Press ENTER to print or
to go to next item
Press ENTER if you want to
print the test result or press
→
Press ENTER to repeat the
→
test or to go to main
menu.
→
→
Page 6