Table of Contents
Advertisement
Reset Configuration Data
This option, when enabled, will reset the configuration data on power up. The options are:
En abled
Disabled
IRQ3-15 / DMA 0-7
The options in this section of the manual will assign each of the interrupts to a PCI/ISA Plug and
Play device, or to a Legacy ISA device. The available options are:
PCI/ISA PnP
Leg acy ISA
PCI IDE IRQ Map
This option allows the selection of the PCI IDE IRQ map. The options are:
ISA
PCI- AUTO
PCI- SLOT 1
PCI- SLOT 2
PCI- SLOT 3
PCI- SLOT 4
Used MEM Base Address
This option allows selection of the base address used by memory. The options are:
N/A
C800
CC00
D000
D400
D800
DC00
3.9
Load BIOS Defaults
This main- menu op tion will cause the CMOS RAM to be loaded with the de fault val ues as signed by
the fac tory. These are usu ally con sid ered safe val ues and do not neces sar ily rep re sent the high est
per form ance val ues.
Page 3-20
WinSystems - "The Embedded Authority"
EBC-LP OPERATIONS MANUAL
030530
Advertisement
Table of Contents
