This option, when enabled, will reset the power management timer if any of the following are
accessed.
IRQ 3-7
IRQ 9-15
NMI
Primary IDE 0
This option, when enabled, will reset the power management timer when the primary IDE drive is
accessed.
Primary IDE 1
This option, when enabled, will reset the power management timer when the primary IDE drive is
accessed.
Secondary IDE 0
This option, when enabled, will reset the power management timer when the secondary IDE drive is
accessed.
Secondary IDE 1
This option, when enabled, will reset the power management timer when the secondary IDE drive is
accessed.
Floppy Disk
This option, when enabled, will reset the power management timer when the floppy drive is
accessed.
Serial Port
This option, when enabled, will reset the power management timer when the serial port is accessed.
Parallel Port
This op tion, when en abled, will re set the power man age ment timer when the par al lel port is
ac cessed.
Page 3-18
WinSystems - "The Embedded Authority"
EBC-LP OPERATIONS MANUAL
030530