HLF Italian Design 4600 G1 Instruction Manual
  1. Manuals
  2. Brands
  3. HLF Italian Design Manuals
  4. Coffee Maker
  5. 4600 G1
  6. Instruction manual

HLF Italian Design 4600 G1 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

INSTRUCTIONS MANUAL
HLF Italian Design
HLF 4600 G1/2/F
ENGLISH
Part Code: 9BIMHL558
I.M. HLF 4600 G1/2/F Eng V8-2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4600 G1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HLF Italian Design 4600 G1

Summary of Contents for HLF Italian Design 4600 G1

  • Page 1 INSTRUCTIONS MANUAL HLF 4600 G1/2/F ENGLISH Part Code: 9BIMHL558 HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 2 These Operating Instructions must be read and applied by anyone performing work with or on the equipment described. In particular, it is imperative that all such persons familiarise themselves with the safety instructions. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 3: Table Of Contents

    General ..................9 2.2.1.2 Proper use of HLF 4600 G coffee maker ........9 2.2.2 Specific hazards and instructions .............10 2.2.2.1 Specific hazards and instructions of HLF 4600 G coffee maker ....................10 Installation ......................13 I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 4 Daily Cleaning ..................39 4.3.4 Entire Cleaning.................42 4.4 Weekly Cleaning ...................47 4.4.1 How to remove and clean the milk frothier (Once a week) ....49 4.4.1.1 Single frother ................49 4.4.1.2 Double frother ................51 HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 5 Inactivity.......................87 Disposal .......................88 Guarantee, consumables, spare parts, ordering procedure......89 9.1 Guarantee .....................89 9.2 Consumables, spare parts, ordering procedure ..........90 Troubleshooting ....................91 10.1 Checklist for fault diagnosis and troubleshooting ..........91 Software Table.....................94 I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 7: Description

    12. Left side panel 13. Cash box fixing holes 14. External beans hopper slider 15. Coffee section top lid 16. LCD display 17. Selection panel 18. Cup station 19. Left milk pipe hole I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 8 22. Modem connection hole 23. Back panel 24. Fan grid 25. Discharge pipe space 26. Internal water tank discharge pipe 27. Inlet water valve 28. Power cord plug 29. Main switch HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 9: Internal Description

    13. RJ45 plug for computer cable 14. PROGRAMMING button 15. CLEANING button 16. Mixing bowl 17. Milk frothier holder 18. Coffee funnel 19. Milk pipe 20. Air pipe 21. Drip tray float cover 22. Cup sensor I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 10: Introduction

    A steam wand can be installed in the machine to have an additional point of steam. 1.2.5 “Coffee splitter” optional A coffee splitter can be added to the coffee machine, which will provide two coffees simultaneously. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 11: Technical Rates

    HLF S.r.l. Via Nobel, 10 31050 Villorba Treviso - ITALY Model : Code : Electrical Serial N.: Marks Date: Water Pressure: 0 ,1 to 0.6 Mpa Max I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 12: Environmental Conditions

     100 mm from the back panel to allow ventilation.  300 mm from the right side to allow the fresh milk operations. NOTE The machine must be placed in vertical position for a correct operation. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 13: Safety Instructions

    • Warning of heat which could lead to injuries. • Allow hot surfaces and components to cool before carrying out any work on these component parts. • If necessary, wear heat-resistant gloves. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 14: Where Warning Symbols Are Located

    Depending on the type of danger, instead of STOP, one of the following symbols could be combined with the word WARNING. WARNING • Warning of electric shock. WARNING • Warning of heat. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 15: Basic Safety Instructions

    No other use of the HLF 4600 G coffee maker will be deemed to be proper. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 16: Specific Hazards And Instructions

    • Hot liquid comes out from the bottom of the hot water outlet. There is a danger of scalding. • The bottom of the hot water outlet is hot after it has been dispensing liquid. There is a danger of burns. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 17 • Never spray the HLF 4600 G coffee maker with a water hose during cleaning. There is a risk of damage. • Always empty the coffee grounds container correctly. There is a danger of overflow. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 18 Replace any lost or defective warning symbols immediately. WARNING Never operate the equipment in a damaged condition. Report any irregularities to your superior immediately, especially if they affect safety. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 19: Installation

    To take out the unit, you have to cut the plastic strip, and take out the upper carton cover. Then you can take out the box all around the unit altogether with the white styrofoam sheets. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 20 Along with the HLF 4600 G coffee maker package, is provided also a second box containing the external coffee beans hopper. Put the beans hopper on the top lid as in the picture. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 21: Checking The Internal Of The Unit

    Don’t try to operate the HLF 4600 G coffee maker in case of presence of internal damages. Even if the damages are minimal, it’s strongly recommended to leave the unit disconnected from the power supply and call the technical service. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 22: Electric Connection

    Refer to paragraph 1.3.3 of this Instruction Manual to select the correct wall plug. WARNING THE USE OF EXTENSION CORDS, ADAPTERS AND/OR MULTIPLE PLUGS IS STRONGLY FORBIDDEN ! HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 23: Water Connection

    To connect the machine to the HLF 4600 G coffee maker, is necessary to use a tube with a female screw of ¾ of inch at each end of it, as showed on the following picture. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 24: Start Up And Operation Mode

    It’s recommended to use a mix of coffee beans for automatic coffee makers, to increase the life of the grinder’s blades and also to get the best performance for the HLF 4600 G coffee maker. For information refer to a coffee beans dealer. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 25 NOTE It’s recommended to do always this operation taking the powder canister out of the machine, in order to keep the interior of the machine clean from dust. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 26: Turning On The Unit

    The following message will be Hold P5 Button. It means that the cleaning cycle has to be run in order to load water into all the hydraulic circuits. Hold P5 Button Push and hold P5 button, till the cleaning cycle starts. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 27 3 seconds and then back ON to reset the computer C A U T I O N Flow Meter K.O Then re-start the cleaning cycle process, by pushing P5 button again. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 28: Initial Heating

    The reason of this factory action is to avoid any damage to the grinder motor, because in presence of coffee beans too oily and with the blades position almost close, the grinder motor may stop working. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 29 When the drink is finished the message Take Your Drink will appear on the LCD display. Take Your Drink The message Select a Drink will appear back again on the LCD display meaning that the HLF 4600 G coffee maker is ready for another drink. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 30: Closing The Grinder Blades

    In this case, push the red lever to the “minus” direction of one click (to the internal of the machine). Then repeat the process illustrated at the paragraph 3.2.5. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 31 NOTE We suggest to make at least 5 coffees before serve the drink to obtain a better result. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 32: Frothing The Milk

    With the door open, place the cup on the cup station and push the Hot Froth Milk button (n° 8). The message Working … will appear on the LCD display and the milk will be draw from the bottle into the frothing system. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 33: Milk Calibration (Only For Machines Provided With Milk Sensor Device)

    A M Milk Calibrat. =N appears on the LCD display. Turn the value to Y. Press button 5 twice in order to quit the programming menu. The message “Sensor Status: Not Activated…” will appear on the LCD display. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 34 1. The Milk Sensor device must be free. 2. Put an empty container on the Milk Sensor device 3. Fill the container in until the message “Activated!!!” will appear on the display. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 35 When the message “Low Milk level” appears on the display the machine will dispense drinks using fresh milk until the milk reserve is over. In case a drink button is pushed the message “Refill Milk” will appear on the display. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 36: Changing The Drink Selection Panel

    In case of trouble printing out the file received, contact the Service and Support to ask for a regular mail shipping. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 37: Installing The Selection Panel

    Loosen the screw that hold the selection panel frame as shown in the picture below: Take off the frame and insert from the lower side the selection panel as shown in the following picture. Place back the frame and fix it with its screw. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 38: Cleaning Guide

    It should be run every 250 coffee cycles performed. Press key 5 to Exit the Process: Press key n°5 to go out of the cleaning menu. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 39: Daily Cleaning

     Press P5 Button: Once the jug has been placed, press P5 button to run the Daily Cleaning. Daily Cleaning In Progress… This means the machine is performing the Daily Cleaning. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 40: Entire Cleaning

     Put An Empty Jug Under Drink Nozz: The machine is asking for an empty jug under the drink nozzle outlets. The jug has to be at least 1 Litre capacious. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 41  Put An Empty Jug Under Drink Nozz: The machine is asking for an empty jug under the drink nozzle outlets. The jug has to be at least 1 Litre capacious. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 42 This means the machine is performing the coffee group final rinsing of the Entire Cleaning. Once the coffee group final rinsing is done, the message Select a Drink will back appear on the LCD display. Select a Drink HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 43: Fresh Milk Machine

    It should be run every 250 coffee cycles performed. Press key 5 to Exit the Process: Press key n°5 to go out of the cleaning menu. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 44: Whipper Cleaning

     Press P5 Button: Once the jug has been placed, press P5 button to run the Daily Cleaning. Whipper Cleaning In Progress… This means the machine is performing the Whipper Cleaning. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 45: Daily Cleaning

    Cleaner: Place the milk tube into a jug full of 600 cc of Fresh water and HLF detergent (follow the instructions on the bottle for the quantities of product to use). I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 46  Put An Empty Jug Under Drink Nozz: The machine is asking for an empty jug under the drink nozzle outlets. The jug has to be at least 1 Litre capacious. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 47 This means the machine is performing the final rinsing of the Daily Cleaning. Once the final rinsing is done, the message Select a Drink will back appear on the LCD display. Select a Drink I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 48: Entire Cleaning

     Put An Empty Jug Under Drink Nozz: The machine is asking for an empty jug under the drink nozzle outlets. The jug has to be at least 1 Litre capacious. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 49 Otherwise warranty will not be valid anymore. CAUTION Use HLF cleaning tablet ONLY. Otherwise warranty will not be valid anymore. Entire Cleaning In Progress… This means the machine is performing the Entire Cleaning. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 50 P5 button to run the milk pipe final rinsing of the Entire Cleaning. Entire Cleaning In Progress… This means the machine is performing the milk pipe final rinsing of the Entire Cleaning. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 51 Entire Cleaning Time Left: 1 min When 5 minutes are run out, the machine will automatically start the coffee group final rinsing. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 52 This means the machine is performing the coffee group final rinsing of the Entire Cleaning. Once the coffee group final rinsing is done, the message Select a Drink will back appear on the LCD display. Select a Drink HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 53: Weekly Cleaning

    Open the top lid.  Remove all the powder canisters.  Thoroughly clean areas under the powder canisters with sponge, hot water and detergent. Dry thoroughly.  Remove the drip tray. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 54  Wipe outside of unit with sponge. Dry.  Place back the ground drawer and drip tray.  Close the top lid and the front door.  Turn back ON the HLF 4600 G coffee maker. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 55: How To Remove And Clean The Milk Frothier (Once A Week)

    Open the front door. Disconnect the clear tubes of the milk frothier as shown in the pictures below:  Disconnect the milk tube.  Disconnect the air tube.  Pull out the milk frother. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 56 CLEANING GUIDE  Remove the cap from the milk frother.  Clean the milk frother connection with the brush.  Clean the “chamber” with the brush. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 57: Double Frother

    Open the front door. Disconnect the clear tubes of the milk frother as shown in the pictures below:  Disconnect the milk tube.  Disconnect the air tube.  Disconnect the coffee, mixer and hot water tubes. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 58 CLEANING GUIDE  Pull out the milk frother.  Remove the cap from the milk frother.  Clean the 7 holes with the brush. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 59 CLEANING GUIDE  Clean the milk frother connection with the brush.  Clean the “chamber” with the brush.  Clean the two milk outlet holes under the milk frother with the brush. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 60: Cup Raiser Cleaning

    4.4.2 Cup raiser cleaning  If the cup raiser accessory is available, clean the adjustable cup raiser using the brush and hot water. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 61: Steam Wand Cleaning

    CLEANING GUIDE 4.4.3 Steam wand cleaning  If the steam wand accessory is available, remove the stainless steel part.  Brush the inside. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 62: Monthly Cleaning

    CAUTION Turn OFF the HLF 4600 G coffee maker.  Disconnect the coffe tube.  Turn each of the four levers to the 12:00 position. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 63 CLEANING GUIDE  Pull the coffee group straight out. Wash it only in hot water, without detergent. Dry thoroughly. To replace it, reverse the process. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 64: Cleaning Conclusion

    Keep the unit clean on a daily basis. Properly adhering to the cleaning procedures presented in this manual will assure that the HLF 4600 G coffee maker will continue to work properly. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 65: Operating The Computer Software

    In order to lock the keyboard, enter the following password: 1827. The machine will show the following message on the LCD display. Stand by Keys are blocked until the password 1827 is entered again. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 66: Programming Steps

    LCD display will be P R O G R A M Drink Counters . P R O G R A M Drink Counters HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 67 Button 4 is used to move backward in the under menu. Button 5 is used to exit from a function and/or quit the programming function. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 68 OPERATING THE COMPUTER SOFTWARE When leaving the programming function you hear two “beeps”. The following picture shows how to move through the software: HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 69: Programming Menu

    0. This identifies the amount of money in the cash box. P R O G R A M Cash NOTE This function is used only on machines that have payment systems attached. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 70 P R O G R A M Extra Cof. This is the total number of extra coffee served. The total count number can be reset to “zero” by pressing button 1. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 71: Function

    If the value is different from 0°C (from 5°C to 25°C) the fridge temperature is controlled by the machine. The message P R O G R A M Service Index=0 will appear on the LCD display. P R O G R A M Service Index=0 I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 72 Descaling/Filter on the LCD display.  If the value is 4 (four) the counter will go up to 52 0 litres before visualizing the message Descaling/Filter on the LCD display. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 73 P R O G R A M Cup Sensor=N This operates the cup sensor switch if installed. It is possible to enable or disable the switch, with YES or NO, using buttons 1 or 2. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 74 P R O G R A M Ground Draw. ON=N This disable the coffee ground counter. It is possible to enable or disable the switch, with YES or NO, using buttons 1 or 2. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 75 LCD display. P R O G R A M Stop if ground = N This Function permits to old the machine if the message “Grounds Drawer” appear on the LCD Display. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 76 By pushing again button 3, the message P R O G R A M Milk Calibrat. =N will appear on the LCD display. This will occur only if the milk sensor is activated (Milk Sensor =Y). HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 77 If the value is set on 0, as soon as the message “Low milk level” appears on the LCD display, the machine will stop dispensing drinks using fresh milk. At this point the menu Function is finished. Push button 5 to quit and go to the next menu. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 78: Drink Number 1

    The following picture shows the names of each component, in order to understand better the meaning of the definitions like mixing bowls, whipper, etc. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 79 (Fresh Milk Version only). P R O G R A M Steam Time = X s This is the amount of time in seconds counted to make steam during the milk frothing process. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 80 1. Then set the Steam Time to get the desired quantity of fresh milk into the cup, and also the soluble 1 settings to get the same powder milk quantity as the fresh milk. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 81 P R O G R A M Soluble 1= X s This is the amount in seconds of instant soluble powder from the canister number 1 (first from right. See paragraph 5.3.3) used to make the drink. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 82 This is the delay time that is possible to set before to having the water 1 falling into the mixing bowl. NOTE This delay has to be used only in case of special recommendation from the supplier of the instant soluble powders. Normally keep it at zero. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 83 1, and it will be the same also for the instant soluble powder number 2. Repeat the steps above to set Soluble 2, 3 and 4. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 84 This function permits to dispense the instant soluble powders through a flashing mode. This solution is recommended in those cases where the amount of product is very small compare to the relative amount of water. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 85 1 when the pre-selection button Extra Long will be pushed before to push the Drink 1 button. All the amounts saved in this menu will be increase according with this percentage. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 86 By pushing again button 3, the message P R O G R A M N° of Coffee 1 will appear on the LCD display. P R O G R A M N° of Coffee 1 This is the number of coffee that the machine does consecutively for a drink. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 87 LCD display. P R O G R A M Coffee First N Turn this option to Y to get the fresh bean coffee before a soluble product or fresh milk. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 88 1 when the pre-selection button Extra Long will be pushed before to push the drink 1 button. All the amounts saved in this menu will be increase according with this percentage. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 89 HLF 4600 coffee maker comes with a setting inside the memory, which assigns a type of drink to each button, but this setting can be change at any time to please the requirements of the user. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 90: Pre-Selection Key

    With this function the pre-selection button is de-activated.  Powder Milk With this function the pre-selection button will dispense drinks only with powder milk instead of fresh milk where set (refer to paragraph 5.3.3, chapter 5). HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 91: Change Password

    The combination of the numbers from 1 to 4 can be used to create a new password. To set the password insert four digits and push button 3 to save the new password into the memory, and to quit the menu. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 92: Daily Maintenance Check List

     Area under coffee group cleaned  Instant powder canisters filled  Drip tray emptied and cleaned  Area above drip tray cleaned  Milk frothier cleaned (Fresh Milk Version only)  Outside cleaned and dusted HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 93: Inactivity

     Wash all the parts in contact with fresh milk (Fresh Milk Version only, refer to paragraph 4.3).  Store in rooms with the environment requirements necessary (refer to paragraph 1.4). I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 94: Disposal

     Empty coffee grounds container.  Take the equipment apart.  Recycle individual parts according to material type.  Dispose of non-recyclable materials according to type. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 95: Guarantee, Consumables, Spare Parts, Ordering Procedure

    To validate the guarantee claim the defective part must be returned to the manufacturer. After inspecting the returned part the manufacturer reserves the right to reject a guarantee claim if one of the conditions referred to above exists. I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 96: Consumables, Spare Parts, Ordering Procedure

    The manufacturer rejects any liability for the situation in which it is found that non device-specific spare parts have been installed in the respective machine. HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

  • Page 97: Troubleshooting

    2. Some valves may be 2. Run a de-scaling process blocked by lime scale. (see paragraph 4.7) 3. Contact the Service and Support 3. The flow meter is 4. Contact the Service and damaged. Support I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...
  • Page 98 1. The water line is 1. Open the main water line Check Water closed 2. An overflow of the 2. Contact the Service and clear water tank Support for replacement occurred HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...
  • Page 99 2. It’s programmed to Support for replacement change the filter Grounds Drawer The coffee grounds Empty the coffee grounds drawer is full. drawer, open the front door and tap the cleaning button I.M. HLF 4600 G1/2/F Eng V8-2013 HLF Italian Design...

  • Page 100: Software Table

    SOFTWARE TABLE 11 Software Table HLF Italian Design I.M. HLF 4600 G1/2/F Eng V8-2013...

This manual is also suitable for:

4600 f4600 g2

Table of Contents