Table of Contents
Advertisement
1
2
3
4
5
6
5
Regular Cleaning *)
Opening the machine
• Open the door by turning key clockwise (1).
Cup magazine and ingredient canisters
Cup magazine
• Activate the locking clip of the cup dispenser
and tilt the cup dispenser forwards (2).
• Remove the lid and fill the cup magazine with
cups.
• Put the lid back on and tilt back the cup
dispenser.
Instant ingredient canisters
• Lift and take out the drip tray and place it
outside of the machine (3).
• Pull slightly forwards the solid waste container
and the base tray to prevent pollution (4).
• If an ingredient canister is present in side of
machine:
- close the outlet spout of the ingredient canister
(5).
- take hold of bracket for canister, raise it slightly
upwards and swing it out with canis ter (6).
- press the green release lever on bracket for
canister and remove the canister (7).
- hang the canister on its support bracket (8).
- remove the lid and fill the canister.
- put the lid back on and let the canister stay on
the support bracket (8).
• Close the outlet spouts of the other canisters
(9).
• Take the canisters by the handles and pull
them forwards to the end stop in guiding
rails (10). The lids are automatically triggered
open.
• If required, the canisters can be removed by
lifting canisters upwards and pulling forwards
over the end stops in guiding rails.
• Fill the ingredient canisters with ingredients.
• Press the lid slightly down and push back the
ingredient canisters.
• Open the outlet spouts of the canisters (11).
*) All parts to be cleaned are designed
in a blue colour. All parts of action are
supplied in a green colour.
10
11
(see overleaf)
7
8
9
Advertisement
Table of Contents
