Installing The Display Assembly - Dell Precision 5530 Service Manual

Installing the Display Assembly

1 Place the palm-rest assembly at the edge of the table with the speakers facing away from the edge.
2 Align the screw holes on the palm-rest assembly with the screw holes on the display hinges.
3 Replace the M2.5 x 5 (6) screws that secure the display hinges to the palm-rest assembly.
4 Route thetouchscreen cable through the routing guides on the fan.
5 Connect thetouchscreen cable and display cable to the system board.
6 Replace the screw (2) that secures the display-cable bracket to the system board.
7 Install the:
a Battery
b Base cover
8 Follow the procedures in
Antenna
After Working Inside Your Computer
Disassembly and reassembly 35