Installing The Heat Sink; System Fan; Removing The Fans - Dell Precision 5530 Service Manual

NOTE: The Heatsink removal screw may vary depending upon the type of Heatsink installed.
a base cover
b battery
3 Remove the M2x3 (5) screws that secure the heatsink to the system board.
NOTE: Ensure to remove the screws in the order (1,2,3,4,5). See the printed image number order on the top of heatsink.
4 Lift the heatsink away from the system board [2].
Installing the Heatsink
1 Align the heatsink with the screw holes on the system board.
2 Replace the M2x3 (5) screws to secure the heatsink to the system board.
NOTE: Ensure to replace the screws in the order (1,2,3,4,5). See the printed image number order on the top of heatsink
3 Install the:
a Battery
b Base cover
4 Follow the procedures in

System fan

Removing the Fans

1 Follow the procedures in
2 Remove the:
a base cover
b battery
24 Disassembly and reassembly
After Working Inside Your Computer
Before Working Inside Your Computer.