Installing The Fans - Dell Precision 5530 Service Manual

Installing the Fans

1 Perform the following steps to install the system fan:
a Align the screw holes on the left fan with the screw holes on the palm-rest assembly.
b Connect the left fan cable to the system board.
c Route the display cable through the routing guides on the left fan.
d Replace the M2x4 (2) screws that secure the left fan to the system board.
e Align the right fan to the system board.
f Route the touch-screen cable through the routing guides on the right fan.
g Connect the touch-screen cable to the system board.
h Connect the fan cable to the connector to the system board.
i Replace the Mylar tape that secures the cable to the system board
j Align the metal brackets that secure touch-screen cable and DisplayPort Over Type-C cable.
k Replace the M2x4 (2) screws that secure the metal brackets and right fan to the system board.
a Install the Base cover
2 Follow the procedures in After Working Inside Your Computer.
Disassembly and reassembly 27