Heat Sink Assemblyassembly; Memory Modules; Removing The Memory Modules; Installing The Memory Modules - Dell Precision 5530 Service Manual

Memory modules

Removing the Memory Modules

1 Follow the procedures in
2 Remove the:
a base cover
b battery
3 Pry the securing clips away from the memory module until it pops-up [1]. Then, remove the memory module from its connector on the
system board [2].

Installing the Memory Modules

1 Insert the memory module into the memory socket.
2 Press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and re-install it.
3 Install the:
a Battery
b Base cover
4 Follow the procedures in

Heat sink assemblyassembly

Removing the Heatsink

1 Follow the procedures in
2 Remove the:
CAUTION: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you
touch.
Before Working Inside Your
After Working Inside Your Computer.
Before Working Inside Your
Computer.
Computer.
Disassembly and reassembly 23