Operation - Docking (Continued); Parts Included - Havis DS-PAN-1101 Owner's Manual

Parts Included

Docking Station
Rear Hooks (x2)
Locator Pins (x2)
Ground Pins (x3)
Release Handle
Barrel Lock
Mounting Bracket
Hardware Kit
(HWK-0046)
This Hardware Kit includes:
1. Zip Ties (5)
2. Keys (2)
3. 1/4"-20 x 5/8" long
Button Head Screws (5)
4. Phillips 1/4"-20 x 3/8"
long Screws (5)
Tools required for installation:
• 5/32" Hex Drive
(For attaching Mounting Bracket to Motion
Device with Button Head 1/4"-20 Screws)
• #3 Phillips
(For attaching Docking Station to Mounting
4
Bracket with Button Head 1/4"-20 Screws)
Docking Connector
Pass-Through Antenna
(Dual, optional)
Front Hooks (x2)
Front Fence
Laptop Screen Security
(Part # DS-DA-236)
Hardware included
• T10 Pin-In Torx Bit
Included with DS-DA-236.
(For attaching DS-DA-236 to Docking Station)

Operation - Docking (continued)

3) With rear of computer elevated, load front of computer into Docking
Station ensuring the computer's front hook pockets align with the Front Hooks
of the Docking Station as shown.
4) Lower rear of computer onto Docking Station, ensuring computer properly
aligns with the Locator Pins on the Docking Station. Apply light downward
pressure to the rear of computer, until Rear Hooks on Docking Station snap
into place and secure the computer. Ensure Rear Hooks are fully engaged
as shown in Reverse View below. If not, apply more downward pressure to
ensure full engagement.
Front View
Reverse View
9