Specifications - moon CP-8 Owner's Manual

MOON CP-8 Surround Preamplifier / Processor

Specifications

Input Processing:
Frequency Response ............................ 10Hz – 100kHz ...................... 4Hz – 100kHz.................10Hz – 100kHz .............. 4Hz – 100kHz
S/N Ratio @ full output ......................... > 113dB ............................. > 107dB .......................> 103dB ....................... > 104dB
Dynamic Range .................................... > 113dB ............................. > 107dB ........................> 103dB ....................... > 107dB
THD..................................................... < 0.003% ........................... < 0.002% ....................< 0.05% ...................... < 0.005%
Channel Separation ............................. > 109dB .............................. > 103dB ...................... > 99dB ........................ > 112dB
Preamplifier Audio Section:
Measurements
Maximum Overall Gain .......... 10dB
Volume adjustment .............. 0.5dB increments
THD (20Hz - 20kHz) ............. < 0.005%
Frequency response............... 20Hz - 20kHz ±0.25dB
Signal-to-noise Ratio ............. 102dB @ full output
Analog input impedance ........ 47k ohms
Analog Input Connections
7.1 Channel ........................ 1 x Single-ended (RCA)
2 Channel ........................... 6 x Single-ended (RCA)
Auxilary ............................... 1 x Balanced pair (XLR)
CD (audio only) .................... 1 x Single-ended pair (RCA)
Phono (audio only) ............... 1 x Single-ended pair (RCA)
Digital Input Connections
Optical ................................. 3 x TosLink
S/PDIF coaxial ...................... 3 x RCA
Video Section:
HDMi 1.3a
Number of inputs ................. 4
Number of outputs ............... 1
Bandwidth ............................ 5Hz - 340MHz +0/-3dB
Component
Number of inputs ................. 3
Number of outputs ............... 1
Y signal ................................ 1.0Vp-p / 75 ohms
PB/CB signal ........................ 0.7Vp-p / 75 ohms
PR/CR signal ........................ 0.7Vp-p / 75 ohms
Bandwidth ............................ 5Hz - 100MHz +0/-3dB
____________________________________________________________________________________
Specifications
1
Digital Input
2-ch DSD
Note 1: EIAJ, A-weighted, f
Note 2: EIAJ, A-weighted, f
2
Digital Input
2-ch DSD Analog Input
= 24-bit/192kHz
S
= 24-bit/96kHz
S
Analog input sensitivity ......... 200mV - 3.0V rms
Analog output impedance ...... 50 ohms (RCA) / 100 ohms (XLR)
Analog output voltage ........... 5 Volts (RCA) / 10 Volts (XLR)
Digital Input ......................... S/PDIF - 75 ohms @ 0.4Vp-p
Digital Input/Output ..............Optical Toslink - 660nm wavelength
Analog Output Connections
7.1 Channel...........................1 x Balanced (XLR)
7.1 Channe ..........................1 x Single-ended (RCA)
2 Channel - Zone 2 ...............1 single-ended pair (RCA)
2 Channel - Zone 3 ...............1 single-ended pair (RCA)
Digital Output Connections
Optical .................................1 x TosLink
Composite
Number of inputs .................. 6
Number of outputs ................ 4 (1 x zone 2)
Level / Impedance ................ 1Vp-p / 75 ohms
Bandwidth ............................ 5Hz - 10MHz +0/-3dB
S-Video
Number of inputs .................. 6
Number of outputs ................ 3
Y signal ................................ 1.0Vp-p / 75 ohms
C signal ................................ 0.286Vp-p / 75 ohms
Bandwidth ............................ 5Hz - 10MHz +0/-3dB
Analog
Pass-Through
78