Disposal Instructions - AuCom CSX-007 Service Manual

Section 6
Component/Fraction
Aluminium No problems
Steel No problems
Wires No problems
Printed circuit boards Problems
Current transformers
SCRs
Plastics Problems
Current transformer
Bus bars - tin-plated copper
Heatsink - extruded aluminium
(black anodised)
Sheet steel brackets -
zinc-plated
710-02696-00C

Disposal Instructions

Environmental
conditions
Re-melt.
Re-melt.
Re-melt in copper works with previous
shredding if necessary. PVC must be
incinerated at high temperature followed by
rapid cooling.
Copper recycling facilities, where all precious
metals are recovered and heavy metals and
other hazardous substances are bounded in
the remainder fraction.
Controlled incineration or recycling
Dismantling/Scrapping
Plastic - 10% glass reinforced polycarbonate
or polycarbonate ABS alloy
CSX Series
DISPOSAL INSTRUCTIONS
Characteristics
Separate from the rest to secure
high grade of recovery.
Separate from the rest to secure
high grade of recovery.
The isolation contains softeners,
gloves are recommended. Some
of the isolation is made of PVC.
All printed circuit boards and
components with plastics contain
flame retardant. The tin solder
contains lead.
Plastics are polycarbonate or
polycarbonate/ABS alloy and
contain glass and flame retardant.
PCB
Cage clamps - yellow zinc
chromated steel
SCR
Spring - stainless steel
Page 19