Table of Contents
Advertisement
Testing the heater
•
Continuity test Fuse
Plate Assembly
•
Remove one black lead
as shown.
•
Set multimeter to "Ohms"
to measure resistance.
•
Touch probes to spade
connectors on fuse plate
assembly as shown.
•
If multimeter displays "1"
the fuse plate assembly
has failed and must be
replaced.
•
Failure of the fuse plate
assembly may indicate
incorrect wiring in the
junction box or of the
heater element, or the
possibility of a short
circuit .
•
Check and confirm all
wiring before
reactivating power
supply.
(continued)
Hide quick links:
Advertisement
Table of Contents
