Cisco 7940G Administration Manual page 9

Chapter 3 Initializing Cisco Unified IP Phones
Modify the following required parameter:
c.
•
d. The following parameters are required for line 1 if registration is enabled and the proxy server
requires authentication:
•
•
e. Save the file to the root directory of your TFTP server or to a subdirectory that contains all the
phone-specific configuration files.
Name the file SIP<mac-addr>.cnf. Type the MAC address in uppercase and the extension, cnf, in
lowercase (for example, SIP00503EFFD842.cnf).
Configuration Example
The following is an example of the phone-specific configuration file that you downloaded from
Cisco.com.
# SIP Configuration Generic File
# Line 1 appearance
line1_name: 1234567
# Line 1 Registration Authentication
line1_authname: "UNPROVISIONED"
# Line 1 Registration Password
line1_password: "UNPROVISIONED"
# Line 2 appearance
line2_name: football
# Line 2 Registration Authentication
line2_authname: "UNPROVISIONED"
# Line 2 Registration Password
line2_password: "UNPROVISIONED"
####### New Parameters added in Release 2.0 #######
# Phone Label (Text desired to be displayed in upper right corner)
phone_label: ""; Has no effect on SIP messaging
# Line 1 Display Name (Display name to use for SIP messaging)
line1_displayname: "User ID"
# Line 2 Display Name (Display name to use for SIP messaging)
line2_displayname: ""
####### New Parameters added in Release 3.0 ######
OL-7890-01
linex_name—Number or e-mail address used when registering. When entering a number, enter
the number without any dashes. For example, enter 555-1212 as 5551212. When entering an
e-mail address, enter the e-mail ID without the host name.
linex_authname—Name used by the phone for authentication if a registration is challenged by
the proxy server during initialization. If a value is not configured for this parameter for a line,
and registration is enabled, the value defined for line 1 is used. If a value is not defined for line
1, the default line1_authname is UNPROVISIONED.
linex_password—Number or e-mail address used when registering. When entering a number,
enter the number without any dashes. For example, enter 555-1212 as 5551212. When entering
an e-mail address, enter the e-mail ID without the host name.
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
How to Customize a Phone-Specific Configuration File
3-9