Connecting To An Automation System - Pentair INTELLIFLO VSF Installation And User Manual

4

Connecting to an Automation System

All IntelliFlo and IntelliPro pumps, including the IntelliFlo
VSF Variable Speed and Flow Pump, are compatible with
Pentair Automation Systems.
An RS-485 communication cable is provided with the
pump and will be used to connect the pump to a Pentair
automation system.
Refer to the automation system manual for further
details on how to connect and use the system with
your variable speed pump.
An IntelliTouch
firmware 1.170 or earlier will display
"VSF+SVRS" in the pump type/selection. While you will
choose this option, the IntelliFlo VSF pump DOES NOT
incorporate SVRS entrapment protection.
INTELLIFLO VSF Variable Speed and Flow Pump Installation and User's Guide
®
®
Control System with
®