Water Pump; Removal And Installation - Mitsubishi Lancer Evolution IX 2006 Workshop Manual

14-20

REMOVAL AND INSTALLATION

CAUTION
If the vehicle is equipped with the Brembo™ disc brake, during maintenance, take care not to contact
the caliper with tools or parts, because the caliper paint will be scratched.
Pre-removal Operation
• Under Cover Removal (Refer to GROUP 51, Front
Bumper P.51-2).
• Engine Coolant Draining (Refer to P.14-15).
• Timing Belt Tensioner Adjuster Removal (Refer to
GROUP 11A, Timing Belt P.11A-36).
20 ± 2 N·m
24 ± 4 N·m
2
23 ± 3 N·m
14 ± 1 N·m
Removal steps
1. Alternator brace
2.

Water pump

ENGINE COOLING
WATER PUMP
WATER PUMP
M1141002701004
22 ± 4 N·m
4
N
1
3
N
Post-installation Operation
• Timing Tensioner Adjuster Belt Installation (Refer to
GROUP 11A, Timing Belt P.11A-36).
• Engine Coolant Refilling (Refer to P.14-15).
• Under Cover Installation (Refer to GROUP 51, Front
Bumper P.51-2).
Bolt specifications
2
8 × 55
Nominal diameter × Nominal length mm
Removal steps (Continued)
3. Water pump gasket
A
>> << 4. O-ring
8 × 22
8 × 60
8 × 14
8 × 22
AC406755
AC504976 AB