Suppressing Stereo Signal; Recording To The Usb Drive; An Overview - RCA RS2130i User Manual

RS2130i EN 15/2/07
Radio
Using Presets
• When in PRESET mode, press
access the previous or next preset station.
EN

Suppressing Stereo Signal

Press FM ST on the remote control to select
between FM mono and stereo mode. STEREO is
displayed in stereo mode.

Recording to the USB drive

An Overview

• You can record CD, Tuner or AUX files to the
MSC device which connected to the USB Jack.
• Recording function always records what is
being played. Press SOURCE to select the
source you want to record from.
• In general, recording starts instantly when
RECORD is pressed. It stops when
TUNE/PRESET
• During recording, REC icon lights.
• There is one exception where recording will
not start immediately when RECORD is pressed
— while in CD mode and the CD is NOT
playing. In this case, the unit goes into
Recording Standby Mode, which is indicated by
the flashing recording icon. This is to avoid
recording "silence" to the USB device.
• The unit will go from Recording Standby Mode
to Recording Mode as soon as the CD
starts playing.
Normal/High Speed
• High speed recording is only available for CD
to USB drive recording.
• When RECORD – NORMAL on the main unit
or RECORD on the remote control is pressed, it
records the CD in real time as it plays.
• When RECORD – HIGH SPEED on the main
unit is pressed, it records the CD at roughly
double the normal speed. No sound could be
heard during this process.
• Through out the following recording
opeartions, simply press RECORD – HIGH
SPEED instead of RECORD – NORMAL on the
main unit or RECORD on the remote control if
you want to record at high speed.
11
4:31 PM Page 20
or to
or RECORD is pressed.
Tip: Under PRESET mode, press
can only access the preset stations. Manual
tuning is not available in this mode.
Recording CD to USB drive
Recording Standby/Selecting Recording Speed
1. Connect the USB drive to the unit's USB jack.
2. In CD stop mode, press RECORD – NORMAL
on the main unit or RECORD on the
remote control.
3. The unit is now in Recording Standby Mode
with REC icon flashing. Turn VOLUME
CONTROL knob or press
select the track to be recorded.
4. Press or RECORD to start recording. The
REC icon displays.
5. Press TUNE/PRESET or RECORD – NORMAL
on the main unit or RECORD on the remote
control to stop recording.
Recording any passage from a CD
1. Play the CD.
2. Press RECORD – NORMAL on the main unit or
RECORD on the remote control when you
want to start recording.
3. Press TUNE/PRESET or RECORD – NORMAL
on the main unit or RECORD on the remote
control when you want to stop recording. You
can start whenever you want.
Record all 5 CDs
Repeat steps 1 to 4 under "Recording
Standby/Selecting Recording Speed" on this page.
Press REPEAT until "ALL DISCS" is displayed. (See
page 14 for more details on playback control.)
or
or to
, ,