Advanced Playback Controls; Setting Up A Program List - RCA RS2130i User Manual

RS2130i EN 15/2/07

Advanced Playback Controls

In CD and USB mode, advanced playback
controls allow you to sample, repeat and random
playback files and set up a Program List. In USB
mode, it allows you to rename tracks.
Sampling Tracks
Press INTRO on the remote control to play the
first 10 seconds of each track on the current disc,
all discs in the tray, or turn intro mode off.
INTRO is displayed when sampling is activated.
Repeat
Press REPEAT on the remote control to
toggle repeat options:
Repeat the current track (REPEAT 1),
Repeat all tracks in USB mode (REPEAT ALL),
Repeat current disc (REPEAT 1 DISC) ,
Repeat all discs (REPEAT ALL DISC), or
Normal playback (ALL DISCS).
Random Playback
Press on the remote control to turn on/off
random playback.
activated.
All the tracks on one disc will be shuffled and
played once before shuffling and playing tracks
from the next disc.
Tip: Random playback can be activated
simultaneously with repeat 1 disc (randomly
play tracks from one disc repeatedly) or repeat
all discs (randomly play tracks from all discs
repeatedly).
4:31 PM Page 23
is displayed when it is

Setting Up a Program List

1. In the Navigation mode, press DISC SKIP to
select disc.
2. Use the navigation buttons to select the track
to add to Program List.
3. Press ADD on the remote control to add
selected track into the next available
program location.
4. Repeat steps 1 to 3 to store more tracks into
program memory.
5. Wait for a few seconds timeout to return to
Navigation mode.
Notes:
• You can create a program of up to 32 tracks.
• In CD stop mode, press PROG to toggle
between the program mode and
normal modes.
Playing a Program List
Press PROG to enter program mode and then
press . Program playback will begin.
PROGRAM is displayed.
Display Program List
1. While the CD playback is stopped, press PROG
to enter PROGRAM mode. To display program
list, press TUNE/PRESET
2. Press or repeatedly to view
each track assignment in the program list.
Deleting from Program List
1. While in PROGRAM mode, press
select the program to delete.
2. Press DELETE on the unit or DEL on the
remote control.
3. Press or to select between "No" to
cancel and "Yes" to confirm.
4. Press to confirm selection.
Deleting the Entire Program List
Follow the above steps by pressing and holding
DELETE on the unit or DEL on the remote
control instead of pressing and releasing.
EN
.
or to
14