Page 2
Elcometer 224 Digital Surface Profile Gauge Surface Profile • The Elcometer 224 measures profile on either flat or curved surfaces • Available with or without memory and Bluetooth®. • Available with either an integral or separate probe. • Separate gauge probes offer greater flexibility to suit any application •...
Page 3
Surface Profile Testing cont. Testex® Replica Tape Testex Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile Testex Tape is available in three profile ranges. There are 50 tests in each roll.
Page 4
Elcometer 319 Digital Dew Point Meter Memory - with reading and statistic review Standard Gauge = Last 10 records Top Gauge= 25,000 records in 999 batches Model: Standard Gauge Top Gauge Part Number G319----S G319----T Accessories T31920162 Magnetic Surface Temperature Probe; -40 to +200°C (-40 to +392°F) T9996390- Liquid Temperature Probe;...
Page 5
A456CFTI1 Elcometer 456 Non-Ferrous Integral A456CNBI1 See separate gauges with N2 PINIP™ Probe Elcometer 456 Dual FNF Integral A456CFNFEI1 A456CFNFBI1 A456CFNFSI1 A456CFNFTI1 Range: 0-5mm (0-200mils) Accuracy*: ±1-3% or ±20μm (±1.0mil) Scale 2 For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance...
Page 6
Elcometer 456 Ferrous Separate A456CFBS A456CFSS A456CFTS Elcometer 456 Non-Ferrous Separate A456CNBS A456CNSS A456CNTS Elcometer 456 Dual FNF Separate A456CFNFBS A456CFNFSS A456CFNFTS Accessories T99922341 Self Adhesive Screen Protectors (x10) T99921325 USB Cable Common Probe range (Scales 6 – 7 ref to catalogue)
Page 7
Elcometer 270 Pinhole Detector ( Wet Sponge ) The Elcometer 270 range utilises the wet sponge technique and sets the standard for wet sponge detectors - high quality, low voltage detectors with a wide range of accessories to meet your requirements.