HP D3600 Maintenance And Service Manual page 39

Error Type Error Code
E2
E3
E9
EA
Fan Module E4
Communication
Error
E5
E6
Error Detail Recommended Action
Absence of the Fan
module 1
Absence of the Fan
module 2
Failure in one or more 1. If a fan module has an amber LED indication, try
rotors of Fan module 1
2. If none of the fans have an amber LED, replace one
Failure in one or more
rotors of Fan module 2
3. If the error persists, then check for new firmware
4. If the error persists, contact an representative, a fan
Permanent error in Fan 1. Remove and reinsert each fan module in turn.
modules I2C bus
2. If this does not resolve the issue, then remove and
Communication error
3. If the error persists, then check for new firmware
with Fan module 1
Communication error
with Fan module 2
4. If the error persists, contact an representative, a fan
Verify that the fan module is tightly inserted in the
slot.
If a fan module is missing, then insert a module in
the empty slot.
reinserting it.
fan module and wait 30 seconds.
releases and upgrade the enclosure firmware. New
firmware versions, containing new features and
defect fixes, are released periodically.
module replacement may be necessary.
reinsert the I/O module that shows the status code.
releases and upgrade the enclosure firmware. New
firmware versions, containing new features and
defect fixes, are released periodically.
module replacement may be necessary.
I/O module error codes 39