Table of Contents
Advertisement
CAUTION!
After changing the parallel system ID, the connection between Muser4000 and UPS
equipment may be interrupted. If this occurs, re-connect according to the instructions
described previously.
CAUTION!
The Parallel cable cannot be connected when setting the parallel parameters.
If after setting the UPS, paralleling of UPS is required;
◆Power off all the UPS.
◆Connect all the UPS according to "parallel cable installation".
◆Then power on the UPS .
4.3 The LCD/LED Display
(1)LED indicator (2)LCD display (3)
Introduction
The display provides more functions than those described in this manual.
CAUTION!
The setting of most parameter cannot be set when the UPS is in
inverter mode.
KE 4256-3230 Keatec T Series UPS 10-40K 380Vac Users Guide English 20170126
Overview of the operating panel of the UPS
Scroll button: enter to next item (4)Off button (5)On button
Page 23
This manual is for qualified personnel only.
Advertisement
Table of Contents
