◆ On the main page of Muser4000, click on the button of "Append. The "Append equipment"
window will open as below.
◆ Enter the name of the UPS into "Equipment Name" box, and select the ID address for the
UPS in the "Equipment address" box.
◆ Click on the "Append" button to complete the connection between UPS and computer.
CAUTION!
Do not use the PC Software to set output voltage and frequency while the
inverter is running. Shut down the inverter, before using the PC Software to set
the output voltage and frequency.
4.Operation
4.1 Operation Modes
The UPS is a double-conversion on-line UPS that may operate in the following modes:
Normal mode
The rectifier/charger derives power from the AC Mains and supplies DC power to the inverter
while floating and boosting charge the battery simultaneously. The inverter converts the DC
power to AC and supplies to the load.
Battery mode (Stored Energy Mode)
KE 4256-3230 Keatec T Series UPS 10-40K 380Vac Users Guide English 20170126
This manual is for qualified personnel only.
Page 15