Warnings And Cautions - HP ProLiant DL320s User Manual

Symbols on equipment
The following symbols may be placed on equipment to indicate the presence of potentially hazardous
conditions.
This symbol indicates the presence of hazardous energy circuits or electric shock
hazards. Refer all servicing to qualified personnel.
WARNING:
enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel.
This symbol indicates the presence of electric shock hazards. The area contains no
user or field serviceable parts. Do not open for any reason.
WARNING:
enclosure.
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING:
do not plug telephone or telecommunications connectors into this receptacle.
This symbol indicates the presence of a hot surface or hot component. If this surface is
contacted, the potential for injury exists.
WARNING:
cool before touching.
This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.
26.8 kg WARNING:
observe local occupational health and safety requirements and guidelines for manual
59 lbs
material handling.
These symbols, on power supplies or systems, indicate that the equipment is supplied
by multiple sources of power.
WARNING: To reduce the risk of injury from electric shock, remove all power cords
to completely disconnect power from the system.

Warnings and cautions

WARNING: Only authorized technicians trained by HP should attempt to repair this
equipment. All troubleshooting and repair procedures are detailed to allow only
subassembly/module-level repair. Because of the complexity of the individual boards and
subassemblies, no one should attempt to make repairs at the component level or to make
modifications to any printed wiring board. Improper repairs can create a safety hazard.
To reduce the risk of injury from electric shock hazards, do not open this
To reduce the risk of injury from electric shock hazards, do not open this
To reduce the risk of electric shock, fire, or damage to the equipment,
To reduce the risk of injury from a hot component, allow the surface to
To reduce the risk of personal injury or damage to the equipment,
Software and configuration utilities 59