System Maintenance Switch - HP ProLiant DL320s User Manual

Description
Item
1 PCI Express x8 connector
2 PCI Express x1 connector
3

System maintenance switch

(on page 12)
4 NMI switch
functionality" on page 13)
5 Battery
6 Front panel LED board
connector
7 Internal USB connector
8 Fan 1 connector
9 Fan 2 connector
System maintenance switch
Position
S1
S2
S3
S4
S5
S6
S7
S8
* "On" activates the function.
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase
all system configuration settings from both CMOS and NVRAM.
CAUTION:
properly configure the server or data loss could occur.
Item
10
11
12
("NMI 13
14
15
16
17
18
Default Function
Off Off = iLO 2 security is enabled
On = iLO 2 security is disabled
Off Off = Normal operation
On = RBSU will not commit any
configuration changes *
Off Reserved
Off Off = Normal operation
On = Override RBSU setting and
enable diskette boot *
Off Off = Power-on password enabled
On = Power-on password disabled *
Off Off = Normal operation
On = BIOS will clear CMOS and
NVRAM *
Off Reserved
Off Reserved
Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
Description
Fan 3 connector
Fan 4 connector
Main power connector
Processor socket
Auxiliary power connector
DIMM slot 1 (bank A)
DIMM slot 2 (bank B)
DIMM slot 3 (bank A)
DIMM slot 4 (bank B)
Component identification 12