Photo Standby; Taking Photos - Kompernass CR 5 A2 Operating Instructions And Safety Instructions

Photo standby

With the menu closed, press the MODE button
photo standby . The device then displays the following overview on the screen
A – displays the remaining number of photos that can still be taken depending on
resolution and available storage space
B – current photo resolution
C – symbol to indicate an inserted microSD card
D – battery charge level of the internal battery
E – date display (only when the "Time & date stamp" is activated)
F – time display (only when the "Time & date stamp" is activated)
G – symbol for self-timer (here 5 seconds: only visible if the function is activated)
H – symbol for exposure correction
I – display for photo standby
J – display for continuous advance function (only visible if feature is enabled)

Taking photos

Press the
the button for fast zoom . You can use the
out . Press the
If you now press the MENU button
Using the ▲▼ buttons
and then call up this menu item with the
item without making a change, press the MODE button
menu board as well as the total number of menu boards is shown . If the
lowest menu item on a menu board is selected which leads to a further menu board,
press the ▼ button
the menu, press the MENU button
CR 5 A2
/ ▲ button repeatedly as required to zoom into the subject . Hold down
/ button to take a photo .
/ you can move the selection bar to the desired entry
to jump to the first entry on the following menu board . To close
during video standby to switch to
/ ▼ button
in photo standby, the following menu opens:
/ button . To exit the activated menu
. Below right, the current
.
:
in the same way to zoom
│ 17 ■
GB