Connection Indicators; Table 7 Symbols; Table 8 Connection States - Vaisala RFL100 User Manual

RFL100 User Guide
3.3 Connection Indicators
Table 7 Symbols
Symbol Description
Data logger
Access point
viewLinc Enterprise Server
Table 8 Connection States
Symbols on Display
22
Symbol
Description
Data logger is searching for an access point.
Data logger has failed to find an access point that is in installation
mode. viewLinc server icon is not shown, as the data logger has
not been accepted to a viewLinc system yet.
The data logger has failed to connect to an access point that
belongs to its own network.
Data logger is successfully connected to an access point, but
there is no connection between the access point and viewLinc
server. Data logger has not been accepted to a viewLinc system
yet.
Data logger is successfully connected to an access point, but
there is no connection between the access point and viewLinc
server. Data logger has been accepted to a viewLinc system.
Data logger is successfully connected to an access point, and
connection between the access point and viewLinc server is also
OK. The viewLinc symbol is flashing to indicate that the data
logger is waiting to be accepted to the viewLinc system as a new
device.
Data logger is successfully connected to an access point, and
connection between the access point and viewLinc server is also
OK. Data logger has been accepted to the viewLinc system.
M211861EN-A
Description
Connection OK
Connection currently
unavailable