Makita GA7060 Instruction Manual page 9

1
2
1. Wheel guard 2. Bearing box 3. Screw 4. Lever
wheel guard with fastening the screw. Be sure to tighten
2
1
1. Screw 2. Lever
To remove wheel guard, follow the installation proce-
dure in reverse.
Installing or removing depressed
Optional accessory
WARNING:
When using a depressed center
on the tool so that the closed side of the guard
always points toward the operator.
CAUTION:
Make sure that the mounting part
result in the dangerous vibration.
the straight part at the bottom of the spindle.
3
4
1. Lock nut 2. Depressed center wheel 3. Inner
that the spindle cannot revolve, then use the lock nut
1. Lock nut wrench 2. Shaft lock
To remove the wheel, follow the installation procedure in reverse.
Optional accessory
WARNING:
1. Lock nut 2. Flex wheel 3. Back up pad 4. Inner
Follow instructions for depressed center wheel but also
accessories page in this manual.
9 ENGLISH
3
4. Mounting part
2
Always use supplied guard when
Wheel can shatter during use
1
2
4
1
1
2
3
4